Réparez vos affaires Communauté Boutique

Electric Bike Throttle Replacement

Introduction

Use this guide to replace your Electric Bike Throttle.

Ce dont vous avez besoin

  1. Electric Bike Throttle Replacement, Brake: étape 1, image 1 de 1

    • Before starting to disassemble your electric bike, turn the power off.

    • Remove the 3/32 inch Allen screw.

    • When removing Allen screw, make sure the driver is well seated because they are simple to strip.

    Modifier

  2. Electric Bike Throttle Replacement, Throttle: étape 2, image 1 de 1

    • Locate the throttle Allen screw.

    • Remove the 5/64 inch Allen screw.

    Modifier

  3. Electric Bike Throttle Replacement, Throttle: étape 3, image 1 de 1

    • Slide the Throttle off.

    • When removing the throttle, be careful. Remove it slowly to avoid damaging the wire.

    Modifier

  5. Electric Bike Throttle Replacement, Control Box: étape 4, image 1 de 1

    • Remove the following screws.

    • 2 mm Philips screws.

    Modifier

  6. Electric Bike Throttle Replacement: étape 5, image 1 de 1

    • Open up the control box.

    Modifier

  7. Electric Bike Throttle Replacement: étape 6, image 1 de 1

    • Track the throttle wire.

    • To ensure you don't lose it, you should mark it.

    Modifier

  8. Electric Bike Throttle Replacement: étape 7, image 1 de 1

    • Locate the throttle wire.

    • Disconnect the throttle wire plug from the controller wire plug.

    • Take caution while handling these wires. You can easily damage them.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Ali Al-hamadani

Membre depuis le 10/06/22

145 Réputation

1 tutoriel rédigé

Badges: 1

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 10

30 derniers jours : 56

Total : 1,002