Aller au contenu principal

Ematic eGlide 4 Side Button Array Replacement

Ce dont vous avez besoin

  1. Ematic eGlide 4 Side Button Array Replacement, Rear Panel: étape 1, image 1 de 1
    • Remove the 4.6mm Phillips #00 screw at the base of the device.

  2. Ematic eGlide 4 Side Button Array Replacement: étape 2, image 1 de 1
    • Slide the rear panel away from the base parallel to the screen.

  3. Ematic eGlide 4 Side Button Array Replacement: étape 3, image 1 de 2 Ematic eGlide 4 Side Button Array Replacement: étape 3, image 2 de 2
    • Carefully remove the speakers from the rear panel.

    • Pull the speakers off of the rear panel.

  4. Ematic eGlide 4 Side Button Array Replacement, Side Button Array: étape 4, image 1 de 1
    • Remove the 3 Phillips #00 4.5 mm screws from the side button array.

  5. Ematic eGlide 4 Side Button Array Replacement: étape 5, image 1 de 2 Ematic eGlide 4 Side Button Array Replacement: étape 5, image 2 de 2
    • Slide the grey ribbon wire connector clip away from the ribbon wire port on the motherboard using the pointed tip of a spudger. This process will unclip the wire from the motherboard to release connection.

    • You do not need to fully disconnect the ribbon wire clip from the ribbon wire port: the clip will stay attached in a loose fit.

    • Remove the ribbon wire from the ribbon wire port on the motherboard.

  6. Ematic eGlide 4 Side Button Array Replacement: étape 6, image 1 de 1
    • Remove the side button array from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Bailey Hughes

Membre depuis le 03/22/15

617 Réputation

6 tutoriels rédigés

Équipe

Baylor, Team 5-8, Williams Spring 2015 Membre de l'équipe Baylor, Team 5-8, Williams Spring 2015

BU-WILLIAMS-S15S5G8

3 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 7

Total : 100