Introduction
If you need to get into your Emerson VCR953 to clean the heads or do repairs on one of the circuit boards inside this shows how to take the top shell of to gain access
Ce dont vous avez besoin
-
-
Remove the two 1/2" long #2 Philips screws from the rear of the case
-
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
