Introduction

Follow these steps to replace a faulty or broken tuner at the head of the Epiphone ES-335 PRO electric guitar. This component of the guitar can also be changed to upgrade the design of the guitar to your liking.

Pièces

Aucune pièce nécessaire.

Using the tuner, loosen the string by turning the tuner.
  • Using the tuner, loosen the string by turning the tuner.

  • Continue to loosen the string until it is easily unwrapped and pulled out of the tuner.

Ajouter un commentaire

On the bridge of the guitar, push the string through the back until the other end is visible. Then grasp and pull the string all the way out.
  • On the bridge of the guitar, push the string through the back until the other end is visible. Then grasp and pull the string all the way out.

Ajouter un commentaire

  • Using a phillips head #2 screwdriver, unscrew the two 1.0 mm length screws on the sides of the tuner.

  • Be sure to keep track of the screws if you are using them for the new tuner, unless the new tuner has screws of its own.

Ajouter un commentaire

  • The tuner should come right out of the back of the head of the guitar.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Michaih Ley Bayani

Membre depuis le 28/03/2018

461 Réputation

4 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 19

Total : 71