Epson BrightLink 450Wi Air Filter Replacement - Tutoriel de réparation iFixit

Introduction

The air filter is a very important part of the Epson Brightlink 450Wi. Although a small piece, it's absolutely vital to keep in good working condition. The air filter is important because it keeps your device clean and dust free.

When too much dust builds up it can cause the device to overheat, which can damage your device and cause malfunctions. In the event of a clogged air filter or when in need of replacement, follow this guide.

Étape 1 Air Filter

Epson BrightLink 450Wi Air Filter Replacement, Air Filter: étape 1, image 1 de 1

Rotate the projector on its side with the Wi-Fi symbol and sliding lock facing you.

Étape 2

Epson BrightLink 450Wi Air Filter Replacement: étape 2, image 1 de 3

Epson BrightLink 450Wi Air Filter Replacement: étape 2, image 2 de 3

Epson BrightLink 450Wi Air Filter Replacement: étape 2, image 3 de 3

Pull back the sliding lock in the direction away from the projector, and gently open the air filter door while still holding the lock open.

Étape 3

Epson BrightLink 450Wi Air Filter Replacement: étape 3, image 1 de 3

Epson BrightLink 450Wi Air Filter Replacement: étape 3, image 2 de 3

Epson BrightLink 450Wi Air Filter Replacement: étape 3, image 3 de 3

Grab the air filter center tab, and pull it gently away from the projector.
Replace the filter by slotting in a new filter the same way it was pulled out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Evan Sandoval

Membre depuis le 09/11/23

441 Réputation

3 tutoriels rédigés

+ 2 badges supplémentaires

Équipe

Austin Community College, Team 9-1, Watkins Spring 2024 Membre de l'équipe Austin Community College, Team 9-1, Watkins Spring 2024

AUSTINCC-WATKINS-S24S9G1

4 membres

3 tutoriels rédigés

0 commentaires

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 76