Réparez vos affaires Communauté Boutique

Epson Stylus Photo 1400 Housing Replacement

Introduction

To get to the inside parts of the printer, the housing components must come off.

Ce dont vous avez besoin

  1. Epson Stylus Photo 1400 Housing Replacement, Housing: étape 1, image 1 de 1

    • Turn off the printer.

    • Disconnect all data connections coming into the printer such as USB, networkd cables, firewire, etc. as well as removing the power cord.

    Modifier

  2. Epson Stylus Photo 1400 Housing Replacement: étape 2, image 1 de 2 Epson Stylus Photo 1400 Housing Replacement: étape 2, image 2 de 2

    • Locate the IEEE cover in the back.

    • Gently slide the cover to the right to unlatch, then pull to remove it.

    Modifier

    errore avevo chiesto informazioni x sostituire la batteria al cellulare HUAWEI Mod. LX1

    Luigi Martinenghi - Réponse

    avevo chiesto informazioni x la sostituzione della batteria cellulare HUAWEI Mod.LX1

    Luigi Martinenghi - Réponse

  3. Epson Stylus Photo 1400 Housing Replacement: étape 3, image 1 de 2 Epson Stylus Photo 1400 Housing Replacement: étape 3, image 2 de 2

    • Using a Phillips #2 screwdriver, remove the four 10 mm screws shown.

    • Remove the 6 mm screw that holds the rear housing in place.

    Modifier

  4. Epson Stylus Photo 1400 Housing Replacement: étape 4, image 1 de 2 Epson Stylus Photo 1400 Housing Replacement: étape 4, image 2 de 2

    • Remove the rear housing by pulling it backwards.

    Modifier

  6. Epson Stylus Photo 1400 Housing Replacement: étape 5, image 1 de 3 Epson Stylus Photo 1400 Housing Replacement: étape 5, image 2 de 3 Epson Stylus Photo 1400 Housing Replacement: étape 5, image 3 de 3

    • Insert a plastic opening tool into the cutouts of the lower housing.

    • Release the two tabs of the side housing by lifting the tool in an upward motion.

    • Remove the side housing by pulling it outwards.

    Modifier

  7. Epson Stylus Photo 1400 Housing Replacement: étape 6, image 1 de 2 Epson Stylus Photo 1400 Housing Replacement: étape 6, image 2 de 2

    • Both side housings are attached by the same type of mechanism.

    • Using the same method, remove the other side housing.

    Modifier

  8. Epson Stylus Photo 1400 Housing Replacement: étape 7, image 1 de 3 Epson Stylus Photo 1400 Housing Replacement: étape 7, image 2 de 3 Epson Stylus Photo 1400 Housing Replacement: étape 7, image 3 de 3

    • Lift the paper support.

    • Open the printer cover and front cover.

    Modifier

  9. Epson Stylus Photo 1400 Housing Replacement: étape 8, image 1 de 3 Epson Stylus Photo 1400 Housing Replacement: étape 8, image 2 de 3 Epson Stylus Photo 1400 Housing Replacement: étape 8, image 3 de 3

    • Remove the four 10 mm Phillips #2 screws from the sides of the printer.

    • Remove the three 6 mm Phillips #2 screws.

    Modifier

  10. Epson Stylus Photo 1400 Housing Replacement: étape 9, image 1 de 2 Epson Stylus Photo 1400 Housing Replacement: étape 9, image 2 de 2

    • Detach the tabs from the pins on each side by pulling it outwards.

    Modifier

  11. Epson Stylus Photo 1400 Housing Replacement: étape 10, image 1 de 2 Epson Stylus Photo 1400 Housing Replacement: étape 10, image 2 de 2

    • Remove the two 10 mm Phillips #2 screws on the front of the printer.

    Modifier

  12. Epson Stylus Photo 1400 Housing Replacement: étape 11, image 1 de 3 Epson Stylus Photo 1400 Housing Replacement: étape 11, image 2 de 3 Epson Stylus Photo 1400 Housing Replacement: étape 11, image 3 de 3

    • Disconnect the two cables on the side by carefully pulling it outwards.

    • You may need to gently rock the two cables up and down while pulling.

    Modifier

  13. Epson Stylus Photo 1400 Housing Replacement: étape 12, image 1 de 2 Epson Stylus Photo 1400 Housing Replacement: étape 12, image 2 de 2

    • Remove the upper housing by lifting it upwards.

    • It's easier to lift the housing by gripping it from the bottom.

    Modifier

    this is where I get stuck. the top won't come off. it seems to be stuck at the right front corner, where the buttons are. Is the button grouping part of the upper housing or does it come separate from the upper housing unit. The picture appears that you are taking the button attachment as part of the upper housing unit. But it is really stuck there on my 1400.

    1gr8nana - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

10 autres ont terminé cette réparation.

Auteur

avec 9 autres contributeurs

Larry Huang

Membre depuis le 10/12/11

1 004 Réputation

4 tutoriels rédigés

Badges: 15

+ 12 badges supplémentaires

Équipe

Cal Poly, Team 17-11, Regan Fall 2011 Membre de l'équipe Cal Poly, Team 17-11, Regan Fall 2011

CPSU-REGAN-F11S17G11

4 membres

12 tutoriels rédigés

Un commentaire

Thank you so much, Larry! I am repurposing my 1400 for sublimation printing and need to get the print head a little easier than standard methods! Much appreciated!

ryan Caputo - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 22

Total : 7,541