Réparez vos affaires Communauté Boutique

Equity Alarm Clock 13014 Alarm Switch Replacement

Introduction

This guide details the process of an Equity Alarm Clock 13014 Alarm Switch Replacement. The alarm switch activates the alarm when it's set to go off. This guide requires some basic soldering.

Ce dont vous avez besoin

  1. Equity Alarm Clock 13014 Alarm Switch Replacement, Replacing the alarm switch: étape 1, image 1 de 3 Equity Alarm Clock 13014 Alarm Switch Replacement, Replacing the alarm switch: étape 1, image 2 de 3 Equity Alarm Clock 13014 Alarm Switch Replacement, Replacing the alarm switch: étape 1, image 3 de 3

    • Remove the battery door using your finger nail or an opening tool.

    Traduire

  2. Equity Alarm Clock 13014 Alarm Switch Replacement, Remove screws: étape 2, image 1 de 2 Equity Alarm Clock 13014 Alarm Switch Replacement, Remove screws: étape 2, image 2 de 2

    • Use a Phillips #1 screwdriver to remove the 3 screws on the back cover.

    Traduire

  4. Equity Alarm Clock 13014 Alarm Switch Replacement, Remove Cover: étape 3, image 1 de 1

    • Remove the back cover gently.

    • DO NOT pull the back cover off quickly or you may damage the wires connected.

    Traduire

  5. Equity Alarm Clock 13014 Alarm Switch Replacement: étape 4, image 1 de 2 Equity Alarm Clock 13014 Alarm Switch Replacement: étape 4, image 2 de 2

    • Use a Phillips #1 screwdriver to remove the small screw located above the alarm switch.

    • Remove the small screw located below the alarm switch as well.

    Traduire

  6. Equity Alarm Clock 13014 Alarm Switch Replacement: étape 5, image 1 de 2 Equity Alarm Clock 13014 Alarm Switch Replacement: étape 5, image 2 de 2

    • Place the end of the soldering iron on the end of the wire connected to the copper cylinder to detach the wire.

    • If you are unfamiliar with soldering, take a look at this article: How to Solder and Desolder Connections.

    • To replace the alarm switch, attach one end of new alarm switch wire to the copper cylinder.

    • Use a Phillips #1 screwdriver to reinstall the switch screws.

    • Follow steps in reverse order to assemble the clock.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 9 autres contributeurs

Alaa

Membre depuis le 10/27/14

311 Réputation

2 tutoriels rédigés

Badges: 7

+ 4 badges supplémentaires

Équipe

Eastern Washington University, Team 1-6, Carnegie Fall 2014 Membre de l'équipe Eastern Washington University, Team 1-6, Carnegie Fall 2014

EWU-CARNEGIE-F14S1G6

6 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 8

30 derniers jours : 23

Total : 1,093