Introduction

Is the sound being produced by the radar staticky or no sound is being produced at all? If so, follow these steps to replace your radar's speakers.

Pièces

Aucune pièce nécessaire.

  1. Remove the three 1.2 mm Phillips #1 screws on the back of the device.
    • Remove the three 1.2 mm Phillips #1 screws on the back of the device.

  2. Pry off the back panel of the radar using the nylon spudger.
    • Pry off the back panel of the radar using the nylon spudger.

    • Carefully unplug the speaker wire from the motherboard.

    • Pull the speaker holder out of the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kennedy Morales

Membre depuis le 20/10/2017

626 Réputation

6 tutoriels rédigés

Équipe

UMass Dartmouth, Team S2-G3, Peak Fall 2018 Membre de l'équipe UMass Dartmouth, Team S2-G3, Peak Fall 2018

UMASSD-PEAK-F18S2G3

3 membres

7 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 25

Total : 91