Aller au contenu principal

Eton FRX5-BT Case Disassembly

Ce dont vous avez besoin

  1. Eton FRX5-BT Case Disassembly, Remove plastic cap: étape 1, image 1 de 1
    • Press on the left most side on the small plastic cap on the back of the radio (it is loosely glued in place).

    • When the plastic cap comes loose, remove it completely to access the lock mechanism below.

  2. Eton FRX5-BT Case Disassembly, Remove the solar panel: étape 2, image 1 de 1
    • Slide the lock mechanism all the way to the left. Now the solar panel is no longer locked in place.

    • Remove the solar panel, by lifting it on the top part. You can use a suction cup or carefully tilt the device when it's in an upright position.

    • Be mindful on the wire connecting the solar panel to the rest of the device.

  3. Eton FRX5-BT Case Disassembly, Remove screws: étape 3, image 1 de 1
    • Remove the six 2.5mm Hex screws.

  4. Eton FRX5-BT Case Disassembly, Open the case: étape 4, image 1 de 1
    • Pull the two halves of the device case apart.

    • There are no wires connecting the two parts of the case, but the solar panel wire goes through a hole in the back case and connects it to the rest of the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Martin

Membre depuis le 06/06/24

124 Réputation

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 10

Total : 28