Introduction

Your vacuum's dust cup will fill up after prolonged use. You need to replace this dust cup for maximum efficiency. This guide will show your how to do this replacement in just a few minutes!

Outils

Aucun outil requis.

Pièces

  1. Press the black separator switch and lightly pull the bottom half away from the top. Remove the screws shown in the picture.
    • Press the black separator switch and lightly pull the bottom half away from the top.

    • Remove the screws shown in the picture.

  2. You can now see the dust cup in the bottom half of your vacuum.
    • You can now see the dust cup in the bottom half of your vacuum.

  3. %Livraison gratuite pour toute commande supérieure à 100,00 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  4. Lift the dust cup out to remove it.
    • Lift the dust cup out to remove it.

  5. Slot the new dust cup back into the cavity.
    • Slot the new dust cup back into the cavity.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nikhila Vijaybhaskar

Membre depuis le 24/09/2013

224 Réputation

2 tutoriels rédigés

Équipe

University of Maryland, Team 1-1, Gulbrandsen Fall 2013 Membre de l'équipe University of Maryland, Team 1-1, Gulbrandsen Fall 2013

UMD-GULBRANDSEN-F13S1G1

3 membres

6 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 5

Total : 326