Réparez vos affaires Communauté Boutique

Eureka 1660SP Extendable Pole Realignment

Ce dont vous avez besoin

  1. Eureka 1660SP Extendable Pole Realignment, Motor Housing: étape 1, image 1 de 2 Eureka 1660SP Extendable Pole Realignment, Motor Housing: étape 1, image 2 de 2

    • Before you start, make sure your vacuum is unplugged the power outlet.

    • Press and hold down the black button below the handle while pulling the pole out.

    Modifier

  2. Eureka 1660SP Extendable Pole Realignment: étape 2, image 1 de 2 Eureka 1660SP Extendable Pole Realignment: étape 2, image 2 de 2

    • Press the black separator switch to separate the top and bottom halves of the vacuum.

    Modifier

  4. Eureka 1660SP Extendable Pole Realignment: étape 3, image 1 de 3 Eureka 1660SP Extendable Pole Realignment: étape 3, image 2 de 3 Eureka 1660SP Extendable Pole Realignment: étape 3, image 3 de 3

    • Use a #2 Phillips head screwdriver to remove six 13.9mm screws from the side of the motor housing (top half) as shown.

    • Remove two 14.1mm screws from the front face of the housing. You are now all set to open the housing.

    • Keep a watchful eye on the two screws from the front face. These two have additional collars to their necks and will not fit in any of the other holes, yet no other screw will fit in their spots without the collar.

    Modifier

  5. Eureka 1660SP Extendable Pole Realignment, Realignment of the extendable pole: étape 4, image 1 de 1

    • Once the housing is open, locate the solid chrome plated piece at the front end of the extendable pole.

    Modifier

  6. Eureka 1660SP Extendable Pole Realignment: étape 5, image 1 de 2 Eureka 1660SP Extendable Pole Realignment: étape 5, image 2 de 2

    • On the side of the motor housing which does not hold the engine, find the center track which runs along the inside of the housing.

    • Re-insert the chrome plated piece into the center track.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 5 autres contributeurs

Evan Fodi

Membre depuis le 09/24/13

122 Réputation

2 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

UMass Dartmouth, Team 1-1, Gulbrandsen Fall 2013 Membre de l'équipe UMass Dartmouth, Team 1-1, Gulbrandsen Fall 2013

UMASSD-GULBRANDSEN-F13S1G1

3 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 447