Introduction

If you determine that your vacuum is no longer picking up debris, this guide will help you to replace the wash screen to increase the suction.

Press the grey dust cup release button and gently pull the dust cup towards you.
  • Press the grey dust cup release button and gently pull the dust cup towards you.

Ajouter un commentaire

Twist the large, black portion of the cyclone/dust cup to the right to unlock the black cyclone from the clear dust cup.
  • Twist the large, black portion of the cyclone/dust cup to the right to unlock the black cyclone from the clear dust cup.

Ajouter un commentaire

  • Twist the clear collar to release the wash screen and small circular collar.

Ajouter un commentaire

  • If screen is beyond washing clean or is cracked, connect new screen to cyclone and collar.

Where can I order a new collar for

my 2012 Eureka vacuum? Thank you

gallo.41 - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

Celina Burchett

Membre depuis le 13/10/2014

1 061 Réputation

8 tutoriels rédigés

Équipe

Clemson, Team 2-2, Benson Fall 2014 Membre de l'équipe Clemson, Team 2-2, Benson Fall 2014

CLEM-BENSON-F14S2G2

4 membres

8 tutoriels rédigés

Where do i purchase this replacement part? I can't find it anywhere.

jane pultz - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 36

Total : 1,079