Aller au contenu principal

Introduction

Is the wheel on the remote control of your FAO Schwarz Apex 1 malfunctioning or damaged? If so, this guide will help you replace the wheel on the remote control. Fixing a faulty wheel on the remote controller does not require any tools.

Pièces

Aucune pièce spécifiée.

  1. Place the remote controller on a firm surface. Use a JIS #1 screwdriver to unscrew the single 11 mm screw in the center of the black wheel.
    • Place the remote controller on a firm surface.

    • Use a JIS #1 screwdriver to unscrew the single 11 mm screw in the center of the black wheel.

  2. Pull the wheel away from the remote controller.
    • Pull the wheel away from the remote controller.

Conclusion

To reassemble your device, follow these instructions in reverse order.

April Wilson

Membre depuis le 07/09/2018

374 Réputation

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 73