Réparez vos affaires Communauté Boutique

Fahrenheit FHT 125PRMR Heating Plate Replacement

Introduction

This guide shows you step by step, how to replace the heating plates for the Fahrenheit FHT 125PRMR hair straightener that are not working when powered on. Please make sure that the device (Fahrenheit FHT 125PRMR), is unplugged when working on it, to avoid damaging any electrical components and harming yourself.

Ce dont vous avez besoin

  1. Fahrenheit FHT 125PRMR Heating Plate Replacement, Heating Plate: étape 1, image 1 de 1

    • Use your fingers or a plastic opening tool to open the side hinges on both sides of the device.

    Modifier

  2. Fahrenheit FHT 125PRMR Heating Plate Replacement: étape 2, image 1 de 1

    • Using a Philips head #2 screwdriver remove the 7mm black screw from the hinge of the device.

    Modifier

  3. Fahrenheit FHT 125PRMR Heating Plate Replacement: étape 3, image 1 de 2 Fahrenheit FHT 125PRMR Heating Plate Replacement: étape 3, image 2 de 2

    • Using the metal spudger, push through the hole the screw was removed from. Doing this will push the copper pin out of the other side.

    • When the pin is removed the two sides of the device can now separate.

    • Be sure to collect the spring that is next to the hinge when they are separated.

    Modifier

  4. Fahrenheit FHT 125PRMR Heating Plate Replacement: étape 4, image 1 de 1

    • Using Philips head (PH1) remove the 6 mm black screw that was underneath the spring as well as the 6 mm black screw next to the heating plate. Remove the panel the screws were holding down.

    Modifier

  6. Fahrenheit FHT 125PRMR Heating Plate Replacement: étape 5, image 1 de 1

    • Using Philips head (PH1) remove the two 4 mm silver screws on the sides of dial panel cover

    Modifier

  7. Fahrenheit FHT 125PRMR Heating Plate Replacement: étape 6, image 1 de 2 Fahrenheit FHT 125PRMR Heating Plate Replacement: étape 6, image 2 de 2

    • Using Philips head (PH00) to remove the 4 mm silver screw on the dial. Remove the dial with your hand.

    Modifier

  8. Fahrenheit FHT 125PRMR Heating Plate Replacement: étape 7, image 1 de 1

    • Remove the covering panel by pulling up with your hand.

    Modifier

  9. Fahrenheit FHT 125PRMR Heating Plate Replacement: étape 8, image 1 de 1
    Modifier

  10. Fahrenheit FHT 125PRMR Heating Plate Replacement: étape 9, image 1 de 2 Fahrenheit FHT 125PRMR Heating Plate Replacement: étape 9, image 2 de 2

    • Remove 3 sliver screws (3mm) (PH1) from the motherboard.

    Modifier

  11. Fahrenheit FHT 125PRMR Heating Plate Replacement: étape 10, image 1 de 1
    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 5 autres contributeurs

Omar El Mounayri

Membre depuis le 09/29/16

61 Réputation

1 tutoriel rédigé

Badges: 2

Équipe

IUPUI, Team 2-2, Harley Fall 2016 Membre de l'équipe IUPUI, Team 2-2, Harley Fall 2016

IUPUI-HARLEY-F16S2G2

4 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 8

Total : 2,108