Réparez vos affaires Communauté Boutique

Fairphone 1 Motherboard Assembly Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Introduction

Prerequisite guide to remove the motherboard. Used for motherboard, camera, and display assembly guides.

Ce dont vous avez besoin

  1. Fairphone 1 Motherboard Assembly Replacement, Motherboard Assembly: étape 1, image 1 de 3 Fairphone 1 Motherboard Assembly Replacement, Motherboard Assembly: étape 1, image 2 de 3 Fairphone 1 Motherboard Assembly Replacement, Motherboard Assembly: étape 1, image 3 de 3

    • Use tweezers to remove the volume rocker and power buttons from the display assembly.

    • During reassembly make sure the orientation of the buttons is correct. The rubber backings must fit into the channels in the assembly.

    Traduire

  2. Fairphone 1 Motherboard Assembly Replacement: étape 2, image 1 de 1

    • Use the flat end of a spudger to disconnect the antenna cable connector.

    • Make sure to only disconnect the connector from its socket, and not the entire socket from the board.

    Traduire

  3. Fairphone 1 Motherboard Assembly Replacement: étape 3, image 1 de 2 Fairphone 1 Motherboard Assembly Replacement: étape 3, image 2 de 2

    • Use tweezers to remove the adhesive foam tape from the top of the digitizer cable ZIF socket.

    Traduire

  5. Fairphone 1 Motherboard Assembly Replacement: étape 4, image 1 de 3 Fairphone 1 Motherboard Assembly Replacement: étape 4, image 2 de 3 Fairphone 1 Motherboard Assembly Replacement: étape 4, image 3 de 3

    • Use the tip of a spudger to flip open the tab on the digitizer ZIF connector.

    • Use tweezers to pull the digitizer cable away from its socket on the motherboard.

    Traduire

  6. Fairphone 1 Motherboard Assembly Replacement: étape 5, image 1 de 1

    • Remove the three 2.5 mm Phillips #000 screws securing the motherboard to the display assembly.

    Traduire

  7. Fairphone 1 Motherboard Assembly Replacement: étape 6, image 1 de 2 Fairphone 1 Motherboard Assembly Replacement: étape 6, image 2 de 2

    • Do not try to remove the motherboard just yet, as it is still connected to the display assembly by the display data cable.

    • Gently lift the top end of the motherboard up to expose the display data cable.

    • The rear-facing camera may be adhered to the display assembly. Try to pry it and the motherboard up together.

    Traduire

  8. Fairphone 1 Motherboard Assembly Replacement: étape 7, image 1 de 2 Fairphone 1 Motherboard Assembly Replacement: étape 7, image 2 de 2

    • Use the tip of a spudger to disconnect the display data cable from the back of the motherboard.

    Traduire

  9. Fairphone 1 Motherboard Assembly Replacement: étape 8, image 1 de 1

    • Remove the motherboard from the display assembly.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 6 autres contributeurs

Andrew Optimus Goldheart

Membre depuis le 10/17/09

503 052 Réputation

407 tutoriels rédigés

Badges: 44

+ 41 badges supplémentaires

Équipe

iFixit Membre de l'équipe iFixit

Staff

135 membres

17 243 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 10

Total : 2,376