Aller au contenu principal

Fairphone 1 Motherboard Replacement

Ce dont vous avez besoin

  1. Fairphone 1 Motherboard Replacement, Back Cover: étape 1, image 1 de 3 Fairphone 1 Motherboard Replacement, Back Cover: étape 1, image 2 de 3 Fairphone 1 Motherboard Replacement, Back Cover: étape 1, image 3 de 3
    • There is a small indentation in the side of the phone near the bottom of the back cover.

    • With the indentation as leverage, use your fingernail to pry the bottom portion of the back cover from the phone.

  2. Fairphone 1 Motherboard Replacement: étape 2, image 1 de 3 Fairphone 1 Motherboard Replacement: étape 2, image 2 de 3 Fairphone 1 Motherboard Replacement: étape 2, image 3 de 3
    • Slide the back cover down and remove it from the phone.

  3. Fairphone 1 Motherboard Replacement, Battery: étape 3, image 1 de 3 Fairphone 1 Motherboard Replacement, Battery: étape 3, image 2 de 3 Fairphone 1 Motherboard Replacement, Battery: étape 3, image 3 de 3
    • There is a small indentation in the back of the phone just below the battery.

    • Use a fingernail in this indentation to push the battery toward the top of the phone

    • Pull the battery out away from the phone.

  4. Fairphone 1 Motherboard Replacement: étape 4, image 1 de 1
    • Remove the battery from your Fairphone.

  5. Fairphone 1 Motherboard Replacement, SIM and MicroSD Card: étape 5, image 1 de 3 Fairphone 1 Motherboard Replacement, SIM and MicroSD Card: étape 5, image 2 de 3 Fairphone 1 Motherboard Replacement, SIM and MicroSD Card: étape 5, image 3 de 3
    • Use your finger to slide the SIM card straight down out of its tray.

    • Remove the SIM card from your Fairphone.

    • Repeat this procedure if you have a second SIM card.

    • Be sure to remove all SIM cards before servicing your phone.

  6. Fairphone 1 Motherboard Replacement: étape 6, image 1 de 2 Fairphone 1 Motherboard Replacement: étape 6, image 2 de 2
    • If you have a microSD card, use your finger to slide it straight out of its slot.

    • Remove the microSD card from your phone.

  7. Fairphone 1 Motherboard Replacement, Midframe Assembly: étape 7, image 1 de 1
    • Remove the five 3.9 mm Phillips #000 screws securing the midframe to the display assembly.

  8. Fairphone 1 Motherboard Replacement: étape 8, image 1 de 3 Fairphone 1 Motherboard Replacement: étape 8, image 2 de 3 Fairphone 1 Motherboard Replacement: étape 8, image 3 de 3
    • The midframe is secured to the display assembly by several small plastic clips.

    • Use an opening pick to carefully pry the midframe away from the display assembly.

    • Start just below the volume rocker and work your way down toward the bottom of the phone, freeing the plastic clips along the side.

  9. Fairphone 1 Motherboard Replacement: étape 9, image 1 de 2 Fairphone 1 Motherboard Replacement: étape 9, image 2 de 2
    • Carefully round the corner, separating the midframe from the display assembly.

  10. Fairphone 1 Motherboard Replacement: étape 10, image 1 de 1
    • After rounding the next corner, the midframe should be free along the bottom and the sides.

  11. Fairphone 1 Motherboard Replacement: étape 11, image 1 de 3 Fairphone 1 Motherboard Replacement: étape 11, image 2 de 3 Fairphone 1 Motherboard Replacement: étape 11, image 3 de 3
    • Run the opening pick and pry along the top seam.

    • To avoid bending or damaging the opening picks, do not pry near to the power switch, USB port, or headphone jack.

  12. Fairphone 1 Motherboard Replacement: étape 12, image 1 de 1
    • Separate any remaining clips and remove the midframe from the phone.

  13. Fairphone 1 Motherboard Replacement, Motherboard Assembly: étape 13, image 1 de 3 Fairphone 1 Motherboard Replacement, Motherboard Assembly: étape 13, image 2 de 3 Fairphone 1 Motherboard Replacement, Motherboard Assembly: étape 13, image 3 de 3
    • Use tweezers to remove the volume rocker and power buttons from the display assembly.

    • During reassembly make sure the orientation of the buttons is correct. The rubber backings must fit into the channels in the assembly.

  14. Fairphone 1 Motherboard Replacement: étape 14, image 1 de 1
    • Use the flat end of a spudger to disconnect the antenna cable connector.

    • Make sure to only disconnect the connector from its socket, and not the entire socket from the board.

  15. Fairphone 1 Motherboard Replacement: étape 15, image 1 de 2 Fairphone 1 Motherboard Replacement: étape 15, image 2 de 2
    • Use tweezers to remove the adhesive foam tape from the top of the digitizer cable ZIF socket.

  16. Fairphone 1 Motherboard Replacement: étape 16, image 1 de 3 Fairphone 1 Motherboard Replacement: étape 16, image 2 de 3 Fairphone 1 Motherboard Replacement: étape 16, image 3 de 3
    • Use the tip of a spudger to flip open the tab on the digitizer ZIF connector.

    • Use tweezers to pull the digitizer cable away from its socket on the motherboard.

  17. Fairphone 1 Motherboard Replacement: étape 17, image 1 de 1
    • Remove the three 2.5 mm Phillips #000 screws securing the motherboard to the display assembly.

  18. Fairphone 1 Motherboard Replacement: étape 18, image 1 de 2 Fairphone 1 Motherboard Replacement: étape 18, image 2 de 2
    • Do not try to remove the motherboard just yet, as it is still connected to the display assembly by the display data cable.

    • Gently lift the top end of the motherboard up to expose the display data cable.

    • The rear-facing camera may be adhered to the display assembly. Try to pry it and the motherboard up together.

  19. Fairphone 1 Motherboard Replacement: étape 19, image 1 de 2 Fairphone 1 Motherboard Replacement: étape 19, image 2 de 2
    • Use the tip of a spudger to disconnect the display data cable from the back of the motherboard.

  20. Fairphone 1 Motherboard Replacement: étape 20, image 1 de 1
    • Remove the motherboard from the display assembly.

  21. Fairphone 1 Motherboard Replacement, Rear Camera: étape 21, image 1 de 3 Fairphone 1 Motherboard Replacement, Rear Camera: étape 21, image 2 de 3 Fairphone 1 Motherboard Replacement, Rear Camera: étape 21, image 3 de 3
    • Use the flat end of a spudger to disconnect the rear-facing camera cable connector from its socket on the motherboard.

    • Remove the rear facing camera from the motherboard.

  22. Fairphone 1 Motherboard Replacement, Motherboard: étape 22, image 1 de 1
    • Motherboard remains.

    • Remember to remove all the plastic seals of the new motherboard. You will find at least one covering the microphone for dust protection.

Conclusion

To reassemble your device, follow these instructions in reverse order.

8 autres ont terminé cette réparation.

Andrew Optimus Goldheart

Membre depuis le 10/17/09

502 332 Réputation

407 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Staff

136 membres

16 573 tutoriels rédigés

Un commentaire

This is a wonderful and detailed guide - thank you. However, I followed the instructions precisely and whilst the phone now switches on perfectly, the touchscreen does not work. Thoughts on how ifixthat welcome!!

Anthe George - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 20

Total : 9,284