Réparez vos affaires Communauté Boutique

Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler

Introduction

This guide will teach you how to fix a jammed paper-roll in your Brother PT-90 Label-Maker.

Ce dont vous avez besoin

  1. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler, Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 1, image 1 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler, Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 1, image 2 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler, Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 1, image 3 de 3

    • Turn your label-maker on its face. Using your thumb, press in and then upward on the fastener located on the side of your device.

    Modifier

  2. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 2, image 1 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 2, image 2 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 2, image 3 de 3

    • Remove the batteries from your device.

    Modifier

  4. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 3, image 1 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 3, image 2 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 3, image 3 de 3

    • Using a plastic opening tool from your iFixit tool kit, leverage the label cartridge out of your device.

    Modifier

  5. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 4, image 1 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 4, image 2 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 4, image 3 de 3

    • Press the label paper back into alignment with the small holders on the right side of the label cartridge.

    Modifier

  6. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 5, image 1 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 5, image 2 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 5, image 3 de 3

    • Place the label cartridge and batteries back into your device. Refasten the bottom case of the label-maker.

    Modifier

  7. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 6, image 1 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 6, image 2 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: étape 6, image 3 de 3

    • Well done! You have successfully corrected the paper-jam in your Brother PT-90 Label-Maker.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Kaitlyn Abrams

Membre depuis le 10/13/16

1 Réputation

1 tutoriel rédigé

Badges: 2

Équipe

University of Maine, Team 2-1, Diaz Fall 2016 Membre de l'équipe University of Maine, Team 2-1, Diaz Fall 2016

UMAINE-DIAZ-F16S2G1

3 membres

2 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 3

30 derniers jours : 6

Total : 787