Réparez vos affaires Communauté Boutique

Flip Video Ultra Circuit Board Replacement

Introduction

This guide will walk you through how to remove and replace the circuit board should your device be broken or malfunctioning. You will need a # 1 Phillips Head screwdriver, a plastic opening tool and tweezers. This easy process should take no more than 15 minutes.

Ce dont vous avez besoin

  1. Flip Video Ultra Circuit Board Replacement, Circuit Board: étape 1, image 1 de 1

    • Unlock the battery cover by sliding the switch to the unlock position.

    Modifier

  2. Flip Video Ultra Circuit Board Replacement: étape 2, image 1 de 1

    • Remove the battery cover by sliding it down the camera.

    Modifier

  3. Flip Video Ultra Circuit Board Replacement: étape 3, image 1 de 1

    • Remove the batteries

    Modifier

  4. Flip Video Ultra Circuit Board Replacement: étape 4, image 1 de 1

    • Slide the black upper casing off from the device.

    Modifier

  5. Flip Video Ultra Circuit Board Replacement: étape 5, image 1 de 2 Flip Video Ultra Circuit Board Replacement: étape 5, image 2 de 2

    • Remove the six 1mm screws from the back and upper casing with the Phillips Head screwdriver.

    Modifier

  6. Flip Video Ultra Circuit Board Replacement: étape 6, image 1 de 1

    • Remove the top casing from the bottom to reveal the inner circuit board.

    Modifier

  8. Flip Video Ultra Circuit Board Replacement: étape 7, image 1 de 2 Flip Video Ultra Circuit Board Replacement: étape 7, image 2 de 2

    • When removing the back panel, the rubber buttons will become loose and likely fall off the board. This is normal and can easily placed back on the board once finished.

    • Remove the six 1mm screws with the 1 Phillips head screwdriver.

    Modifier

  9. Flip Video Ultra Circuit Board Replacement: étape 8, image 1 de 1

    • Gently separate the circuit board from the casing.

    Modifier

  10. Flip Video Ultra Circuit Board Replacement: étape 9, image 1 de 2 Flip Video Ultra Circuit Board Replacement: étape 9, image 2 de 2

    • Unscrew the single 1mm screw from USB housing unit.

    Modifier

  11. Flip Video Ultra Circuit Board Replacement: étape 10, image 1 de 2 Flip Video Ultra Circuit Board Replacement: étape 10, image 2 de 2

    • Unscrew the 2 1mm screws and gently separate camera wires from plastic casing.

    Modifier

  12. Flip Video Ultra Circuit Board Replacement: étape 11, image 1 de 1

    • Gently pry out the USB housing unit with the Ifxit Opening Tool.

    Modifier

  13. Flip Video Ultra Circuit Board Replacement: étape 12, image 1 de 3 Flip Video Ultra Circuit Board Replacement: étape 12, image 2 de 3 Flip Video Ultra Circuit Board Replacement: étape 12, image 3 de 3

    • Remove the two 1mm screws and separate the circuit board and camera from the plastic casing.

    Modifier

  14. Flip Video Ultra Circuit Board Replacement: étape 13, image 1 de 1

    • Unscrew the camera housing unit from the plastic case.

    Modifier

  15. Flip Video Ultra Circuit Board Replacement: étape 14, image 1 de 3 Flip Video Ultra Circuit Board Replacement: étape 14, image 2 de 3 Flip Video Ultra Circuit Board Replacement: étape 14, image 3 de 3
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète

    • With tweezers, remove the microphone and USB connections.

    Modifier

  16. Flip Video Ultra Circuit Board Replacement: étape 15, image 1 de 2 Flip Video Ultra Circuit Board Replacement: étape 15, image 2 de 2

    • Unscrew the two 1mm screws from the board shown. Remove screen from circuit board.

    Modifier

  17. Flip Video Ultra Circuit Board Replacement: étape 16, image 1 de 2 Flip Video Ultra Circuit Board Replacement: étape 16, image 2 de 2

    • Remove the single 2.1 mm screw and separate camera from the circuit board.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 4 autres contributeurs

Nathaniel Ruf

Membre depuis le 10/18/16

514 Réputation

5 tutoriels rédigés

Badges: 5

+ 2 badges supplémentaires

Équipe

UMass Dartmouth, Team 5-7, Martin Fall 2016 Membre de l'équipe UMass Dartmouth, Team 5-7, Martin Fall 2016

UMASSD-MARTIN-F16S5G7

3 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 6

30 derniers jours : 14

Total : 690