Introduction

After too many charging cycles, the battery's capacity will be decreased. This is true for any Lithium-ion battery. Luckily the replacement of the battery in this device is very simple.

Pièces

Aucune pièce nécessaire.

To open up the casing, you will need to unscrew the four Phillips #0 15mm screws which are accessible from the back.
  • To open up the casing, you will need to unscrew the four Phillips #0 15mm screws which are accessible from the back.

Ajouter un commentaire

Gently separate the two halves of the casing.
  • Gently separate the two halves of the casing.

Ajouter un commentaire

  • Disconnect the battery from the motherboard by lifting up on the white plastic tab on the top of the connection.

  • Gently pull the cord out by the white plastic adapter. Do not pull from the red and black cord.

Ajouter un commentaire

  • Unscrew the Phillips four #0 15mm screws to free the motherboard from the casing.

Ajouter un commentaire

  • Slowly pull the motherboard out of the casing. Make sure the loose battery wire doesn't get snagged.

Ajouter un commentaire

  • Remove the four #0 15mm screws to release the battery housing from the case.

Ajouter un commentaire

  • Take the battery housing and battery out of the casing.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Vladislav Ignatov

Membre depuis le 23/09/2014

369 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team 12-5, Blackwell Fall 2014 Membre de l'équipe USF Tampa, Team 12-5, Blackwell Fall 2014

USFT-BLACKWELL-F14S12G5

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 408