Introduction

This repair guide will show you how to replace the battery on a Fossil Q Marshal Gen 2 smartwatch. Be careful not to damage the wiring or the metal connectors on your smartwatch.

Squeeze retaining pins together to release chain from watch body. This can be done by hand or with tweezers.
  • Squeeze retaining pins together to release chain from watch body. This can be done by hand or with tweezers.

  • Remove chain from opposing side of watch body.

Ajouter un commentaire

Use tweezers to grip the notches on the back cover, then unscrew the back cover (counter-clockwise) from the watch housing.
  • Use tweezers to grip the notches on the back cover, then unscrew the back cover (counter-clockwise) from the watch housing.

  • There is an actual tool made to remove this back cover, using the right tool may save you from scratching the back of watch with tweezers. The backcover tool can be purchased online, a local jeweler may also be willing to remove it for you.

Ajouter un commentaire

  • Utilize tweezers or a spudger or your fingers to pull the black wire connector from the motherboard.

  • Utilize a spudger to pull the orange connector off of the motherboard.

Ajouter un commentaire

  • Utilize tweezers to pull the white battery connector from the motherboard.

Ajouter un commentaire

  • The internal electronics can now be pulled out of the watch as one unit leaving the screen remaining in the watch housing.

  • Taking the flat end of the spudger, pry it up.

Ajouter un commentaire

  • The battery is secured to the back of the motherboard utilizing a sticky pad. Gently separate the battery from the board while making sure not to put too much stress on the board. This is best done at the location shown.

Ajouter un commentaire

  • Remove battery from plastic housing.

  • Slip wires through large slot in plastic housing to completely remove.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Clay Walker

Membre depuis le 07/11/2017

194 Réputation

1 tutoriel rédigé

Équipe

IUPUI, Team S2-G5, Harley Fall 2017 Membre de l'équipe IUPUI, Team S2-G5, Harley Fall 2017

IUPUI-HARLEY-F17S2G5

3 membres

4 tutoriels rédigés

I have read your awesome guide. This is really helpful.

https://powerbank-online.com/reviews/bat...

Ellen Sam - Réponse

thank you, i did it. But now what. i have no idea where to buy the spare part. hahaha. Help Me :(

Rafael “Satriabhi” Atheya - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 7

7 derniers jours : 81

30 derniers jours : 384

Total : 1,881