Introduction
This guide will primarily uses Push-pins. There is potential to hurt yourself with the pin. Be careful with the spring-loaded pin holding the clasp as it may bounce out of place.
Ce dont vous avez besoin
-
-
Keep clasp in open position.
-
Push one of the spring-loaded pins out of the hole with a Push-pin.
-
Wiggle watch band and clasp till free from each other.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
Équipe
Cal Poly, Team 14-10, Amido Spring 2015 Membre de l'équipe Cal Poly, Team 14-10, Amido Spring 2015
CPSU-AMIDO-S15S14G10
3 membres
5 tutoriels rédigés
