Réparez vos affaires Communauté Boutique

Framework Laptop 16" Touchpad Spacers Replacement

Introduction

Use this guide to replace one or both touchpad spacers in your Framework 16" laptop.

Note: the laptop used in this guide is a generic setup of one US keyboard, one numpad module, and two touchpad spacers. Your setup might vary, but the procedure should remain the same.

  1. Framework Laptop 16" Touchpad Spacers Replacement, Before you begin: étape 1, image 1 de 2 Framework Laptop 16" Touchpad Spacers Replacement, Before you begin: étape 1, image 2 de 2

    • Unplug all cables and fully shut down your laptop.

    • If your repair requires a spudger, a T5 Torx, or a Phillips screwdriver, you can use the included Framework screwdriver. Whichever works best for you!

    Modifier

  2. Framework Laptop 16" Touchpad Spacers Replacement, Unlock the Input Modules: étape 2, image 1 de 3 Framework Laptop 16" Touchpad Spacers Replacement, Unlock the Input Modules: étape 2, image 2 de 3 Framework Laptop 16" Touchpad Spacers Replacement, Unlock the Input Modules: étape 2, image 3 de 3

    • Use your fingernail to pull out the two Input Module latches and unlock them.

    • The latch will show red if it's unlocked.

    Modifier

  4. Framework Laptop 16" Touchpad Spacers Replacement, Remove the touchpad spacers: étape 3, image 1 de 3 Framework Laptop 16" Touchpad Spacers Replacement, Remove the touchpad spacers: étape 3, image 2 de 3 Framework Laptop 16" Touchpad Spacers Replacement, Remove the touchpad spacers: étape 3, image 3 de 3

    • Use your fingers to slide the touchpad spacer toward the bottom edge of the laptop and unclip it.

    • If you're having trouble, check if the corresponding Input Module latch is properly unlocked.

    • Lift the touchpad spacer off the laptop and remove it.

    Modifier

  5. Framework Laptop 16" Touchpad Spacers Replacement: étape 4, image 1 de 1

    • Repeat the same procedure for the other touchpad spacer.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers Community for help.

Une autre personne a terminé cette réparation.

Auteur

Alex Diaz-Kokaisl

Membre depuis le 01/16/22

129 318 Réputation

600 tutoriels rédigés

Badges: 34

+ 31 badges supplémentaires

Équipe

iFixit Membre de l'équipe iFixit

Staff

140 membres

18 066 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 27

Total : 136