Aller au contenu principal

Fujifilm Endeavor 100ix Battery Door Replacement

Ce dont vous avez besoin

  1. Fujifilm Endeavor 100ix Battery Door Replacement, Battery Door: étape 1, image 1 de 1
    • Locate and remove two 6.4mm screws on the bottom of the camera with a Phillips #00 screwdriver.

  2. Fujifilm Endeavor 100ix Battery Door Replacement: étape 2, image 1 de 1
    • Locate the battery door.

  3. Fujifilm Endeavor 100ix Battery Door Replacement: étape 3, image 1 de 1
    • Locate the latch on the battery door.

    • Use your finger pry to it open where it says "BATT."

  4. Fujifilm Endeavor 100ix Battery Door Replacement: étape 4, image 1 de 1
    • Remove the battery from the camera by pulling the battery door outward.

  5. Fujifilm Endeavor 100ix Battery Door Replacement: étape 5, image 1 de 1
    • Locate and remove three black 3.80mm screws on the back of the black casing with the Phillips #00 screwdriver.

  6. Fujifilm Endeavor 100ix Battery Door Replacement: étape 6, image 1 de 1
    • Squeeze the camera placing a thumb on the tab marked CE.

    • Pull the back half of the camera firmly away from the camera body.

  7. Fujifilm Endeavor 100ix Battery Door Replacement: étape 7, image 1 de 2 Fujifilm Endeavor 100ix Battery Door Replacement: étape 7, image 2 de 2
    • Locate and remove the 3.80mm screw that holds the plastic strip to the camera body with a Phillips #00 screwdriver.

    • The plastic strip will now come off the camera body.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Eric Nicolai

Membre depuis le 01/10/11

679 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 13-5, Forte Winter 2011 Membre de l'équipe Cal Poly, Team 13-5, Forte Winter 2011

CPSU-FORTE-W11S13G5

5 membres

11 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 4

Total : 1,863