Réparez vos affaires Communauté Boutique

Fujifilm FinePix 4700 Zoom Back Cover Replacement

Ce dont vous avez besoin

  1. Fujifilm FinePix 4700 Zoom Back Cover Replacement, Back Cover: étape 1, image 1 de 3 Fujifilm FinePix 4700 Zoom Back Cover Replacement, Back Cover: étape 1, image 2 de 3 Fujifilm FinePix 4700 Zoom Back Cover Replacement, Back Cover: étape 1, image 3 de 3

    • Use the Phillips #00 screwdriver to remove the 7 screws on the sides of the camera:

    • Four 3.95mm Phillips screws located on the bottom of the camera

    • Two 3.95mm Phillips screws located on the right side of the camera

    • One 3.95mm Phillips screw located on the left side of the camera

    Traduire

  2. Fujifilm FinePix 4700 Zoom Back Cover Replacement: étape 2, image 1 de 1

    • Slide open the battery compartment cover with your thumb.

    Traduire

  4. Fujifilm FinePix 4700 Zoom Back Cover Replacement: étape 3, image 1 de 3 Fujifilm FinePix 4700 Zoom Back Cover Replacement: étape 3, image 2 de 3 Fujifilm FinePix 4700 Zoom Back Cover Replacement: étape 3, image 3 de 3

    • Wedge the edge of the spudger between the front and back case, near the corner of the flash.

    • Carefully run the spudger along the right edge of the camera, creating an opening.

    • Insert the spudger into the left side of the camera, above the screwhole. Then carefully run it along this edge.

    Traduire

  5. Fujifilm FinePix 4700 Zoom Back Cover Replacement: étape 4, image 1 de 2 Fujifilm FinePix 4700 Zoom Back Cover Replacement: étape 4, image 2 de 2

    • Watch out for the orange ribbon that is still attached to the back cover when you lift it up. It is very delicate and might rip.

    • Slowly lift the back cover straight up, lightly jiggling it if necessary.

    • Remove the battery compartment cover.

    Traduire

  6. Fujifilm FinePix 4700 Zoom Back Cover Replacement: étape 5, image 1 de 1

    • Gently insert the spudger under the clip holding the orange ribbon. The clip should lift up and the ribbon will slide out.

    • This step will free the back cover from the rest of the camera.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 6 autres contributeurs

Sarthak Patel

Membre depuis le 04/03/12

10 Réputation

2 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

Cal Poly, Team 14-8, Forte Spring 2012 Membre de l'équipe Cal Poly, Team 14-8, Forte Spring 2012

CPSU-FORTE-S12S14G8

5 membres

17 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 6

Total : 1,140