Aller au contenu principal

Introduction

This guide serves as a tear-down of the frame and is meant to be used with the intention of removing it. This action is needed to access the inside components.

Warning: The frame may be damaged in this process, as well as the ribbon cable that connects the motherboard with the LCD Screen. Be very careful with the removal of the frame to avoid any damage.

Pièces

Aucune pièce spécifiée.

  1. Flip the camera so that it is now upside down.
    • Flip the camera so that it is now upside down.

    • With a screwdriver, unscrew all highlighted screws.

  2. Flip the camera so that it is now on the right side.
    • Flip the camera so that it is now on the right side.

    • With a screwdriver, unscrew all highlighted screws.

  3. Flip the camera so that it is now on the left side.
    • Flip the camera so that it is now on the left side.

    • Move or remove the flap hiding the camera ports.

    • With a screwdriver, unscrew all highlighted screws.

  4. Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant
  5. Flip the camera so that it is now on the top side.
    • Flip the camera so that it is now on the top side.

    • With a spudger, pry off the highlighted metal piece of the camera.

  6. With a screwdriver, unscrew all highlighted screws.
    • With a screwdriver, unscrew all highlighted screws.

  7. Pull the LCD Screen up and out of the way.
    • Pull the LCD Screen up and out of the way.

    • With a screwdriver, unscrew all highlighted screws.

  8. With a spudger, pry off the frame. If the frame does not easily dislodge after a few attempts, ensure that all screws are taken out.
    • With a spudger, pry off the frame.

    • If the frame does not easily dislodge after a few attempts, ensure that all screws are taken out.

Conclusion

To reassemble your device, follow these instructions in reverse order.


Andrew Scouten

Membre depuis le 22/10/2018

637 Réputation

5 tutoriels rédigés

Équipe

Baylor, Team S1-G2, Williams Fall 2018 Membre de l'équipe Baylor, Team S1-G2, Williams Fall 2018

BU-WILLIAMS-F18S1G2

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 8

Total : 125