Réparez vos affaires Communauté Boutique

Fujifilm FinePix HS30EXR Frame Replacement

Introduction

This guide serves as a tear-down of the frame and is meant to be used with the intention of removing it. This action is needed to access the inside components.

Warning: The frame may be damaged in this process, as well as the ribbon cable that connects the motherboard with the LCD Screen. Be very careful with the removal of the frame to avoid any damage.

Ce dont vous avez besoin

  1. Fujifilm FinePix HS30EXR Frame Replacement, Frame: étape 1, image 1 de 1

    • Flip the camera so that it is now upside down.

    • With a screwdriver, unscrew all highlighted screws.

    Traduire

  2. Fujifilm FinePix HS30EXR Frame Replacement: étape 2, image 1 de 1

    • Flip the camera so that it is now on the right side.

    • With a screwdriver, unscrew all highlighted screws.

    Traduire

  3. Fujifilm FinePix HS30EXR Frame Replacement: étape 3, image 1 de 1

    • Flip the camera so that it is now on the left side.

    • Move or remove the flap hiding the camera ports.

    • With a screwdriver, unscrew all highlighted screws.

    Traduire

  5. Fujifilm FinePix HS30EXR Frame Replacement: étape 4, image 1 de 1

    • Flip the camera so that it is now on the top side.

    • With a spudger, pry off the highlighted metal piece of the camera.

    Traduire

  6. Fujifilm FinePix HS30EXR Frame Replacement: étape 5, image 1 de 1

    • With a screwdriver, unscrew all highlighted screws.

    Traduire

  7. Fujifilm FinePix HS30EXR Frame Replacement: étape 6, image 1 de 1

    • Pull the LCD Screen up and out of the way.

    • With a screwdriver, unscrew all highlighted screws.

    Traduire

  8. Fujifilm FinePix HS30EXR Frame Replacement: étape 7, image 1 de 2 Fujifilm FinePix HS30EXR Frame Replacement: étape 7, image 2 de 2

    • With a spudger, pry off the frame.

    • If the frame does not easily dislodge after a few attempts, ensure that all screws are taken out.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.


Auteur

avec 6 autres contributeurs

Andrew Scouten

Membre depuis le 10/22/18

814 Réputation

5 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

Baylor, Team S1-G2, Williams Fall 2018 Membre de l'équipe Baylor, Team S1-G2, Williams Fall 2018

BU-WILLIAMS-F18S1G2

4 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 9

Total : 680