Aller au contenu principal

Fujifilm FinePix XP70 Back Button Replacement

Ce dont vous avez besoin

  1. Fujifilm FinePix XP70 Back Button Replacement, Battery: étape 1, image 1 de 1
    • Power off the camera.

    • Leaving the camera on while removing presents the risk of electrical shock or permanent data loss.

  2. Fujifilm FinePix XP70 Back Button Replacement: étape 2, image 1 de 2 Fujifilm FinePix XP70 Back Button Replacement: étape 2, image 2 de 2
    • Push down on the center button and turn the dial on the side counterclockwise to open the battery compartment.

  3. Fujifilm FinePix XP70 Back Button Replacement: étape 3, image 1 de 1
    • Pull the orange tab towards the hinge to release the battery.

  4. Fujifilm FinePix XP70 Back Button Replacement, Button: étape 4, image 1 de 2 Fujifilm FinePix XP70 Back Button Replacement, Button: étape 4, image 2 de 2
    • Pry the black button plate off using a plastic opening tool.

    • Buttons can fall out easily.

    • It's easiest to start from the side exposed by an open battery compartment.

    • When putting this plate back on, orientate the buttons as shown to properly fit back into the plate.

  5. Fujifilm FinePix XP70 Back Button Replacement: étape 5, image 1 de 1
    • Pull the three buttons out.

  6. Fujifilm FinePix XP70 Back Button Replacement, Front and Back Panel: étape 6, image 1 de 1
    • Remove one Phillips screw with a Phillips head 0 screwdriver

    • Remove one hex head screw with a hex 1.3 screwdriver bit.

  7. Fujifilm FinePix XP70 Back Button Replacement: étape 7, image 1 de 1
    • Unscrew two 4.0mm long hex head screws with a hex 1.3 screwdriver bit.

  8. Fujifilm FinePix XP70 Back Button Replacement: étape 8, image 1 de 1
    • Unscrew five 4.0mm screws with a Phillips head 0 screwdriver

  9. Fujifilm FinePix XP70 Back Button Replacement: étape 9, image 1 de 1
    • Pry the black bottom plate off using a plastic opening tool.

    • It is easier to start on the side of the open battery compartment.

  10. Fujifilm FinePix XP70 Back Button Replacement: étape 10, image 1 de 2 Fujifilm FinePix XP70 Back Button Replacement: étape 10, image 2 de 2
    • Pry the front plate off using a plastic opening tool.

    • It's recommended to start at the ridge on the top or bottom side.

  11. Fujifilm FinePix XP70 Back Button Replacement: étape 11, image 1 de 1
    • Lift off the front plate.

  12. Fujifilm FinePix XP70 Back Button Replacement: étape 12, image 1 de 3 Fujifilm FinePix XP70 Back Button Replacement: étape 12, image 2 de 3 Fujifilm FinePix XP70 Back Button Replacement: étape 12, image 3 de 3
    • Pry the back plate off with a plastic opening tool

  13. Fujifilm FinePix XP70 Back Button Replacement, Back Panel: étape 13, image 1 de 1
    • Pry the two latches off using a spudger.

    • It takes some force to pry the latches off, so be careful to not break them.

  14. Fujifilm FinePix XP70 Back Button Replacement: étape 14, image 1 de 3 Fujifilm FinePix XP70 Back Button Replacement: étape 14, image 2 de 3 Fujifilm FinePix XP70 Back Button Replacement: étape 14, image 3 de 3
    • Pry the remaining latches with a plastic opening tool.

    • It's best to start on the opposite side. Then pry off the top and end at the bottom.

    • It may take some force to remove this, but be careful to not break the latches off.

  15. Fujifilm FinePix XP70 Back Button Replacement: étape 15, image 1 de 1
    • Pull the two halves apart.

    • Reattach the LCD ribbon cable into the slot before closing the halves when reassembling.

  16. Fujifilm FinePix XP70 Back Button Replacement: étape 16, image 1 de 2 Fujifilm FinePix XP70 Back Button Replacement: étape 16, image 2 de 2
    • Unscrew seven 4.0 mm screws with a Phillips 00 screwdriver.

    • Unscrew four 3.0 mm screws with a Phillips 00 screwdriver..

  17. Fujifilm FinePix XP70 Back Button Replacement, Back Button: étape 17, image 1 de 1
    • Lift of the metal panel using a plastic opening tool.

  18. Fujifilm FinePix XP70 Back Button Replacement: étape 18, image 1 de 1
    • Remove the desired button(s).

    • Handle the buttons with care since they easily fall off.

Conclusion

To reassemble your device, follow these instructions in reverse order.

sandino santos

Membre depuis le 03/22/17

101 Réputation

1 tutoriel rédigé

Équipe

UMass Dartmouth, Team S7-G3, Julie Spring 2017 Membre de l'équipe UMass Dartmouth, Team S7-G3, Julie Spring 2017

UMASSD-JULIE-S17S7G3

4 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 2

Total : 292