Introduction
When the camera is non-responsive, the most common issue is a faulty motherboard. This guide will take you through the step of removing the old motherboard and installing a new one.
Ce dont vous avez besoin
-
-
Remove the two screws on the right side of the camera and the two screws on the left side.
-
Use a small #00 Phillips flat head screwdriver.
-
Keep all the screws in a container and the two different types separate.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.