Introduction

A guide on how to take out the many screws located on the inside, metal cover and how to install an LCD.

Remove the screws from the bottom of the camera using the tri-wing screwdriver.
  • Remove the screws from the bottom of the camera using the tri-wing screwdriver.

    • Three 5.4 mm tri-head screws.

Ajouter un commentaire

Remove screws from charger side of camera using the Phillips 00 screwdriver.
  • Remove screws from charger side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

Ajouter un commentaire

  • Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

Ajouter un commentaire

  • Separate the front and back casing using the spudger.

  • Gently pull apart the two casings.

  • Pull the back casing away from the camera.

Ajouter un commentaire

  • Remove screws from the casing covering the LCD using the Phillips 00 screwdriver.

    • Remove the fifteen 2.9 mm Phillips #00 screws.

Ajouter un commentaire

  • Slide casing out using the spudger.

Ajouter un commentaire

  • Gently remove the LCD display data cable by gripping the end that is connected to the motherboard and pulling out.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Sarah Looper

Membre depuis le 11/03/2013

76 Réputation

7 tutoriels rédigés

Équipe

Clemson, Team 13-4, Benson Spring 2013 Membre de l'équipe Clemson, Team 13-4, Benson Spring 2013

CLEM-BENSON-S13S13G4

2 membres

8 tutoriels rédigés

Great Guide! Worked great to replace my screen!

Daniel - Réponse

Awesome guide! BEST WORK I'VE EVER SEEN ON A REPAIR GUIDE

Johnston Thayer - Réponse

Shutter button replacement was great too!

Daniel -

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 630