Introduction

The hinge cover has the computer power button, wireless switch, and volume toggle.

  1. Locate the two clips on the bottom of the computer that support the battery.
    • Locate the two clips on the bottom of the computer that support the battery.

    Ajouter un commentaire

  2. Using your fingers,  push the clips inward and then upward.
    • Using your fingers, push the clips inward and then upward.

    • Lift the battery out of the computer.

    Ajouter un commentaire

    • Use a spudger to lift the back of the hinge cover on the left and right sides of the computer.

    Ajouter un commentaire

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Lay the computer flat on a stable surface with the monitor pointing away from you.

    Ajouter un commentaire

    • Use a spudger to partially lift the hinge cover.

    Ajouter un commentaire

    • The hinge cover has a ribbon cable that is attached to the motherboard. To prevent damage, lift the hinge cover slowly.

    • Lift the hinge cover enough to expose the ribbon cable.

    Ajouter un commentaire

    • Disconnect the ribbon cable from the motherboard and remove the hinge cover from the computer.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Neil Daniels

Membre depuis le 17/01/2011

1 285 Réputation

11 tutoriels rédigés

Équipe

Cal Poly, Team 5-18, Amido Winter 2011 Membre de l'équipe Cal Poly, Team 5-18, Amido Winter 2011

CPSU-AMIDO-W11S5G18

3 membres

11 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 3

30 derniers jours : 7

Total : 3,013