Aller au contenu principal

Introduction

This guide will give step by step instructions on how to remove and replace the camera in a Samsung Galaxy Tab S 10.5.

  1. Place the plastic opening tool into the SD card slot or charge port. Try in an upward motion until you see a separation between the tablet and back cover.
    • Place the plastic opening tool into the SD card slot or charge port.

    • Try in an upward motion until you see a separation between the tablet and back cover.

  2. Work around the entire device by sliding the plastic opening tool around the rim.
    • Work around the entire device by sliding the plastic opening tool around the rim.

    • If this is the first time, it will be hard to separate the back cover from the tablet.

    • The clips are approximately 5 cm apart. While working around the device, the clips will make a dislocating sound when disconnected.

  3. Remove the back cover once all links have been separated.
    • Remove the back cover once all links have been separated.

    • Be careful when touching any of the internal components of the tablet.

  4. Use a spudger to disconnect the camera from the motherboard and then remove the camera. Use a spudger to disconnect the camera from the motherboard and then remove the camera. Use a spudger to disconnect the camera from the motherboard and then remove the camera.
    • Use a spudger to disconnect the camera from the motherboard and then remove the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Jordan Soto

Membre depuis le 26/08/2015

2 711 Réputation

6 tutoriels rédigés

Équipe

USF Tampa, Team 3-2, Eyestone Fall 2015 Membre de l'équipe USF Tampa, Team 3-2, Eyestone Fall 2015

USFT-EYESTONE-F15S3G2

3 membres

18 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 15

Total : 2,004