Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Place the Game Boy Pocket face-down on a clean, flat surface. Remove the battery compartment cover, along with any batteries inside.
-
Use a Y1 tri-wing screwdriver and turn counterclockwise to remove the four external screws.
-
Use a Y1 tri-wing screwdriver and turn counterclockwise to remove the two screws inside of the battery compartment.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Place your hands on the front and back covers of the Game Boy Pocket, and carefully separate the device.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a Phillips #1 screwdriver and turn counterclockwise to remove the three screws on the motherboard.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a plastic opening tool to dislodge and remove the clip securing the ribbon cable.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a plastic opening tool to dislodge the ribbon cable.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Grab the black piece protruding from the motherboard, and lift up to remove the motherboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use your fingers to remove the three silicone button covers
-
Use a plastic opening tool to remove the buttons.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a plastic opening tool to lift the LCD screen away from the front cover.
-
Use your fingers to remove the LCD screen.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Replace the front housing, following each step in reverse order.
-
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.