Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

  1. Place the Game Boy Pocket face-down on a clean, flat surface. Use a Y1 tri-wing screwdriver and turn counterclockwise to remove the four external screws. Use a Y1 tri-wing screwdriver and turn counterclockwise to remove the two screws inside the battery compartment.
    • Place the Game Boy Pocket face-down on a clean, flat surface.

    • Use a Y1 tri-wing screwdriver and turn counterclockwise to remove the four external screws.

    • Use a Y1 tri-wing screwdriver and turn counterclockwise to remove the two screws inside the battery compartment.

  2. Place your hands on the front and back covers of the Game Boy Pocket, and carefully separate the device. Set the back cover aside. You will need it to reassemble the device. Set the back cover aside. You will need it to reassemble the device.
    • Place your hands on the front and back covers of the Game Boy Pocket, and carefully separate the device.

    • Set the back cover aside. You will need it to reassemble the device.

  3. Use a Phillips #1 screwdriver and turn counterclockwise to remove the three screws on the motherboard.
    • Use a Phillips #1 screwdriver and turn counterclockwise to remove the three screws on the motherboard.

  4. Use a plastic opening tool to dislodge and remove the clip securing the ribbon cable. Make sure you apply pressure on both sides of the clip to loosen it. Make sure you apply pressure on both sides of the clip to loosen it.
    • Use a plastic opening tool to dislodge and remove the clip securing the ribbon cable.

    • Make sure you apply pressure on both sides of the clip to loosen it.

  5. Use a plastic opening tool to dislodge the ribbon cable. Be gentle to prevent tearing the ribbon.
    • Use a plastic opening tool to dislodge the ribbon cable.

    • Be gentle to prevent tearing the ribbon.

  6. Grab the black piece protruding from the motherboard, and lift up to remove the motherboard. Grab the black piece protruding from the motherboard, and lift up to remove the motherboard.
    • Grab the black piece protruding from the motherboard, and lift up to remove the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Adriana Rahrig

Membre depuis le 07/10/2014

1 247 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team 1-1, Leahy Fall 2014 Membre de l'équipe USF Tampa, Team 1-1, Leahy Fall 2014

USFT-LEAHY-F14S1G1

4 membres

10 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 1

7 derniers jours : 9

30 derniers jours : 42

Total : 2,348