Introduction
Be very careful when handling connector wires, as they are incredibly easily broken. This guide is unique only in removing the circuit board from the screen.
Ce dont vous avez besoin
-
-
Remove the six T5 Torx 6.32mm screws securing the back cover to the watch.
-
-
Étape 3 Water Proof Gasket
Attention : l'étape 3 est issue d'un tutoriel marqué comme en cours.
-
Remove the orange gasket.
-
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.