Réparez vos affaires Communauté Boutique

Garmin Fenix 3 HR "self made charging"

Introduction

cut off the mini-USB, or micro-USB, or Thunderbolt and remove the isolation of the red and the black wires.

the red wire will go on the top of the 4 contacts.

the black will go on the bottom last of the 4 contacts.

be creative and fasten them to the fenix 3. I used a clip and insulted it with a piece of plastic. you can also use duck take or similar to stick the 2 wires to the corresponding contacts on the fenix.

plug in the USB to a USB port or USB charging plug.

on the display you should now see the charging %

Ce dont vous avez besoin

  1. Garmin Fenix 3 HR "self made charging", Garmin Fenix 3 HR "self made charging": étape 1, image 1 de 2 Garmin Fenix 3 HR "self made charging", Garmin Fenix 3 HR "self made charging": étape 1, image 2 de 2

    • Insert wisdom here.

    Traduire

  3. Garmin Fenix 3 HR "self made charging": étape 2, image 1 de 1

    • Insert wisdom here.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

11 autres ont terminé cette réparation.

8 commentaires

great job, very easy to do it. The hard part is that the wiring is too small :)

thank you

Pedro R. - Réponse

Thank you, David704. Your guide save me 13.50$ and a 3 day wait.

asads zia - Réponse

Thank you.. forgot charger at work before vacation.. thank youuuu :)

jakadels - Réponse

Thank you! You just saved my step streak :)

Magnus Berg - Réponse

quiero que me cheque un garmin istinct que no recibe carga

Victor Manuel Perez Rodriguez - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 23

30 derniers jours : 63

Total : 12,074