Introduction

This guide will give you all the necessary steps to change your old motherboard for a new one.

Remove the five 7mm screws with H1.3 hex screwdriver.
  • Remove the five 7mm screws with H1.3 hex screwdriver.

Ajouter un commentaire

Use a plastic opening tool to remove the face of the device to expose the inner components.
  • Use a plastic opening tool to remove the face of the device to expose the inner components.

    • There is one metal piece at the top of the face that is loose. This is the GPS antenna which will need to be removed as well.

    • Be careful of the ribbon that connects the motherboard to the display.

Ajouter un commentaire

  • Disconnect this ribbon from the motherboard using tweezers.

Ajouter un commentaire

  • Using a T5 screwdriver, remove the two 5mm screws.

    • The motherboard should move freely.

Ajouter un commentaire

  • Another ribbon is attached from the underside of the motherboard. Disconnect this ribbon.

Ajouter un commentaire

  • Disconnect wires connecting battery to motherboard.

Ajouter un commentaire

  • The battery is glued to the motherboard and will need pried off with a nylon spudger.

Ajouter un commentaire

  • Now attach battery to new motherboard and reassemble.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jacob Smiley

Membre depuis le 26/03/2018

157 Réputation

1 tutoriel rédigé

Équipe

IUPUI, Team S1-G6, Harley Spring 2018 Membre de l'équipe IUPUI, Team S1-G6, Harley Spring 2018

IUPUI-HARLEY-S18S1G6

3 membres

2 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 5

7 derniers jours : 24

30 derniers jours : 117

Total : 308