Introduction

The screen is a vital component to a digital smart watch. With the right tools, replacing the screen can be done efficiently and effectively.

Power off your watch before disassembling it.
  • Power off your watch before disassembling it.

  • Place the watch on a hard surface with the screen facing down.

  • Unscrew the four 7.0 mm screws located at each corner using a T5 screwdriver.

Ajouter un commentaire

Pry the old battery out using a plastic spudger.
  • Pry the old battery out using a plastic spudger.

Ajouter un commentaire

Unscrew the two T4 6 mm screws located on both sides of the motherboard.
  • Unscrew the two T4 6 mm screws located on both sides of the motherboard.

Ajouter un commentaire

Lift the motherboard up using a plastic spudger.
  • Lift the motherboard up using a plastic spudger.

    • Ribbon cables are still attached underneath—be careful when prying the motherboard up.

Ajouter un commentaire

Flip the ZIF connectors using a plastic spudger tool.
  • Flip the ZIF connectors using a plastic spudger tool.

  • Remove the motherboard.

Ajouter un commentaire

Remove gold piece in the corner using the pointed side of the 4 spudger.
  • Remove gold piece in the corner using the pointed side of the 4 spudger.

  • Any spudger with a pointed end should work to remove this piece.

Ajouter un commentaire

Pry the screen up with a plastic opening tool.
  • Pry the screen up with a plastic opening tool.

  • Any plastic tool with a flat edge should work to remove the screen.

  • Remove the screen.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Suzanne Drumm

Membre depuis le 21/03/2018

85 Réputation

1 tutoriel rédigé

Équipe

IUPUI, Team S5-G3, Baechle Spring 2018 Membre de l'équipe IUPUI, Team S5-G3, Baechle Spring 2018

IUPUI-BAECHLE-S18S5G3

3 membres

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 17

Total : 74