Aller au contenu principal

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Garmin GPS V Logic Board Replacement

Ce dont vous avez besoin

  1. Garmin GPS V Logic Board Replacement, Logic Board: étape 1, image 1 de 3 Garmin GPS V Logic Board Replacement, Logic Board: étape 1, image 2 de 3 Garmin GPS V Logic Board Replacement, Logic Board: étape 1, image 3 de 3
    • Orient the GPS V backside up.

    • With a #0 Philips screwdriver, remove six M2x0.4 black screws on the back of the unit.

  2. Garmin GPS V Logic Board Replacement: étape 2, image 1 de 3 Garmin GPS V Logic Board Replacement: étape 2, image 2 de 3 Garmin GPS V Logic Board Replacement: étape 2, image 3 de 3
    • CAUTION: With the spudger, gently pry the back plate off the unit starting at the corners.

    • As you open the unit, locate the 8-pin white connector on the logic board and disconnect it. The antenna side of the device should act like a hinge as you open it.

    • Open the device all the way, making sure to not disconnect the brown antenna wire.

  3. Garmin GPS V Logic Board Replacement: étape 3, image 1 de 2 Garmin GPS V Logic Board Replacement: étape 3, image 2 de 2
    • With a #1 Philips screwdriver, remove the silver M2x0.4 screw on the logic board near the brown wire.

    • NOTE: You may need to rotate the device to get better access to the screw.

  4. Garmin GPS V Logic Board Replacement: étape 4, image 1 de 3 Garmin GPS V Logic Board Replacement: étape 4, image 2 de 3 Garmin GPS V Logic Board Replacement: étape 4, image 3 de 3
    • Locate the ribbon connector on the logic board.

    • With the spudger, gently apply pressure to both sides of the brown connector lock until it pushes out.

    • With the spudger, gently work the ribbon cable out of the connector until it is free.

  5. Garmin GPS V Logic Board Replacement: étape 5, image 1 de 2 Garmin GPS V Logic Board Replacement: étape 5, image 2 de 2
    • CAUTION: With the spudger, gently pry out the logic board.

    • NOTE: Be careful to not disconnect the brown antenna wire as you remove the logic board.

  6. Garmin GPS V Logic Board Replacement: étape 6, image 1 de 1
    • Locate the brown wire connection on the logic board.

    • CAUTION: Carefully apply heat with the soldering iron while gently pulling on the brown wire.

    • NOTE: It may take some time to heat the flux up before the wire can be pulled out.

    • Pull brown wire free of the logic board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Connor

Membre depuis le 01/23/12

194 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 3-25, Amido Winter 2012 Membre de l'équipe Cal Poly, Team 3-25, Amido Winter 2012

CPSU-AMIDO-W12S3G25

4 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 5,573