Replacing the speaker in a Garmin Nuvi 200.

Peel off the sticker from the bottom of the device to reveal two screws.
  • Peel off the sticker from the bottom of the device to reveal two screws.

Ajouter un commentaire

Remove two T5 Torx screws.
  • Remove two T5 Torx screws.

Ajouter un commentaire

  • Insert a plastic opening tool in the gap between the front and rear casing.

  • Carefully work the tool around the gap, separating the two halves of the case.

    • Keep the power switch in place while removing the rear case.

Ajouter un commentaire

  • Unscrew the two screws on opposite sides of the speaker using the #00 Phillips screwdriver.

there is no use showing how to replace a speaker in nuvi if we cant find any

seems like a god dam mistery

Jean Michel Tche - Réponse

  • Pull the cable out to detach the speaker from the logic board.

Ajouter un commentaire

  • Wedge the iPod opener into the space between the speaker and the case.

  • Apply pressure to pry the speaker away from the case.

Ajouter un commentaire


To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.


Membre depuis le 11/04/2010

504 Réputation

3 tutoriels rédigés


Cal Poly, Team 25-90, Amido Spring 2010 Membre de l'équipe Cal Poly, Team 25-90, Amido Spring 2010


4 membres

9 tutoriels rédigés

just a note i had a problem with the speaker in my nuvi 200 an upon opening up found speaker plug had come loose i guess from being dropped a few times pushed plug in an works fine please check all connections before replacing your speaker saved me $$ thanks for a great site everyone...

randaleholland - Réponse

Where can you buy replacement speakers for the Garmin units?

Brat Fry - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 11

Total : 6,440