Introduction

If your power button is defective, replace the old one with the new power button.

  1. Remove the barcode sticker at the bottom of the device.
    • Remove the barcode sticker at the bottom of the device.

    Ajouter un commentaire

  2. Remove two 8.4 mm T5 screws from the bottom of the device.
    • Remove two 8.4 mm T5 screws from the bottom of the device.

    Ajouter un commentaire

    • Using a plastic opening tool, carefully pry open the device.

    • Open the device carefully, making sure not to damage the gold ribbon cable that connects the screen to the motherboard.

    turn the unit around

    Andrew Hayden - Réponse

    Since there is no replacement speaker whats the point of this process?

    greg - Réponse

    Very detailed set of instructions! Does anyone known the thread size of the screws in step 2? 8.4 mm T5 screws: is the length of the screw (8.4 mm) ,and the head specification (T5- size of screw driver). I need the actual thread specification. I lost one of the screws and the other one 's head is stripped. I need to replace both screws.

    Harold Schultz - Réponse

    • Remove the power button.

    Where can I buy the button

    milosvalek - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

Timothy

Membre depuis le 26/01/2012

35 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 9-3, Regan Winter 2012 Membre de l'équipe Cal Poly, Team 9-3, Regan Winter 2012

CPSU-REGAN-W12S9G3

5 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 20

Total : 9,151