Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
For this guide you will be opening the device, but it is fairly simple. Before you begin disassembling the device, be sure the power is off.
Ce dont vous avez besoin
-
-
Wedge a plastic opening tool in between the outer frame and the rear panel assembly.
-
Pry the outer frame off the perimeter of the rear panel assembly.
-
-
-
-
Remove the two Phillips #00 screws securing the motherboard to the front case assembly.
-
-
-
Use the edge of a plastic opening tool to flip up the retaining flap on the LCD ribbon cable ZIF socket (highlighted in red, located on the left side.)
-
Use the plastic opening tool to pull the LCD ribbon cable out of its socket.
-
Disconnect the right connector using the edge of a plastic opening tool.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.