Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

Removal of the system fan. when following the keyboard instructions there is no need to unplug it only fold it back to gain access to the fan.

Pièces

Aucune pièce spécifiée.

  1. Flip the laptop over. Slide the battery release tab to the right.
    • Flip the laptop over. Slide the battery release tab to the right.

  2. Lift the battery out.
    • Lift the battery out.

  3. Remove the 5 screws holding the keyboard in place.
    • Remove the 5 screws holding the keyboard in place.

  4. CAUTION: When lifting the keyboard out, do not lift keyboard up. Only fold back along the space bar edge. DO NOT PULL the black cable by the ribbon section; only pull it by the connector itself.
    • CAUTION: When lifting the keyboard out, do not lift keyboard up. Only fold back along the space bar edge.

    • DO NOT PULL the black cable by the ribbon section; only pull it by the connector itself.

    • Follow the black ribbon cable to the connector and gently pull straight up.

  5. Unscrew the 4 captive screws. Unplug fan from the system and pull it out. The fan unit should slide forward before coming free.
    • Unscrew the 4 captive screws.

    • Unplug fan from the system and pull it out. The fan unit should slide forward before coming free.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Elizabeth Mazer

Membre depuis le 14/10/2010

78 Réputation

10 tutoriels rédigés

Équipe

Cal Poly, Team 20-10, Maness Fall 2010 Membre de l'équipe Cal Poly, Team 20-10, Maness Fall 2010

CPSU-MANESS-F10S20G10

3 membres

22 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 2,117