Introduction

If your laptop keeps crashing or is running slow, then consider replacing the RAM of your device using this guide here.

Pièces

Aucune pièce nécessaire.

To prevent injury, make sure the laptop is not plugged in while removing the battery!
  • To prevent injury, make sure the laptop is not plugged in while removing the battery!

  • Make the switch in the upper right corner of the turned over laptop is switched to the "unlocked" position. (the unlocked padlock icon)

Ajouter un commentaire

Push the switch to the right, toward the inside of the computer to dislodge the battery.
  • Push the switch to the right, toward the inside of the computer to dislodge the battery.

  • Finally, pull the battery outwards and away from the laptop as depicted in this image.

Ajouter un commentaire

  • Using the Phillips #1 screwdriver, remove the four 6mm screws on the back of the laptop.

Ajouter un commentaire

  • Insert the plastic prying tool and pry the back panel off starting at an edge and moving your way around it.

Ajouter un commentaire

  • Remember to always remove or disconnect the battery!

  • Push outwards on the metal tab to unlock the RAM stick from its position.

Ajouter un commentaire

  • Lift up and remove the RAM from the device.

  • Follow the same steps to remove the second RAM stick from your device.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Tanya Jain

Membre depuis le 19/03/2018

315 Réputation

3 tutoriels rédigés

Équipe

UMass Dartmouth, Team S3-G2, Peak Spring 2018 Membre de l'équipe UMass Dartmouth, Team S3-G2, Peak Spring 2018

UMASSD-PEAK-S18S3G2

3 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 15