Introduction

The RAM in this laptop can be accessed easily with very little disassembly. There are two slots that both accept PC2-5300S RAM.

Pièces

Aucune pièce nécessaire.

To prevent injury, make sure the laptop is unplugged before removing the battery.
  • To prevent injury, make sure the laptop is unplugged before removing the battery.

  • Make sure the switch in the upper right corner of the laptop is switched to the "unlock" position (toward the unlocked padlock icon).

Ajouter un commentaire

Pull the switch on the upper lefthand corner of the laptop towards the unlocked padlock icon.
  • Pull the switch on the upper lefthand corner of the laptop towards the unlocked padlock icon.

  • Firmly pull the battery outwards and away from the laptop.

Ajouter un commentaire

  • Remove the seven 6 mm Phillips #0 screws from the back of the case.

  • Leave all the screws in the back plate and so you don't lose them.

Ajouter un commentaire

  • Pull upwards on the top of the back cover to remove it.

Ajouter un commentaire

  • Pull outwards on the silver metal pins to release the upper RAM module.

  • The module will automatically lift up 30° after it has been released.

Ajouter un commentaire

  • Firmly grasp the outer portion of the RAM module, and pull it outward to remove it from the port.

  • Repeat the same process for the lower RAM module.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Chris Naughton

Membre depuis le 07/04/2014

705 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 6-2, Forte Spring 2014 Membre de l'équipe Cal Poly, Team 6-2, Forte Spring 2014

CPSU-FORTE-S14S6G2

5 membres

11 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 7

Total : 674