Ensure device is powered off and unplugged from a power source. Place the device upside down.
  • Ensure device is powered off and unplugged from a power source. Place the device upside down.

Ajouter un commentaire

Use a PH0 Phillips head screwdriver to remove the 9.0 mm screw on the rectangular panel underneath the device.
  • Use a PH0 Phillips head screwdriver to remove the 9.0 mm screw on the rectangular panel underneath the device.

Ajouter un commentaire

  • Use a plastic opening tool to pry open the rectangular panel the 9.0 mm screw was removed from.

Ajouter un commentaire

  • Remove a single 9.0 mm screw on the silver box containing the hard drive. Pull the plastic flap at the side opposite to the side of the screw housing back in order to remove the silver box containing the hard drive.

Ajouter un commentaire

  • Remove the two 9.0 mm screws on each side of the silver box to slide the hard drive from the silver box housing.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jared Lotfi

Membre depuis le 31/01/2018

283 Réputation

2 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 45