Introduction

Access to the Hard Drive Compartment will require some tool work.

Pièces

Aucune pièce nécessaire.

Remove the five identical 3/16" Phillips screws that secures the hard drive and memory cover using a Phillips #0 Screwdriver.
  • Remove the five identical 3/16" Phillips screws that secures the hard drive and memory cover using a Phillips #0 Screwdriver.

Ajouter un commentaire

Lift up the base cover from the the top with your hands to a 90 degree angle.
  • Lift up the base cover from the the top with your hands to a 90 degree angle.

  • Remove the base cover and place it in a safe and dry place.

Ajouter un commentaire

  • Remove the 1/4" Phillip screw located at the top right of the Hard Drive using a Phillips #0 Screwdriver .

Ajouter un commentaire

  • Remove the Hard Drive component from its compartment. To do so, slide the component downward away from the battery pack.

  • Lift the Hard Drive to a 90 degree angle and out of its slot.

  • Place the Hard Drive in a designated zone.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Tim En

Membre depuis le 26/01/2013

481 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 7-24, Regan Spring 2014 Membre de l'équipe Cal Poly, Team 7-24, Regan Spring 2014

CPSU-REGAN-S14S7G24

4 membres

9 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 8

Total : 535