Aller au contenu principal

Gateway SA1 Hard Drive Replacement

Ce dont vous avez besoin

  1. Gateway SA1 Hard Drive Replacement, Battery: étape 1, image 1 de 1
    • Move the latch to the right of the battery to unlock.

  2. Gateway SA1 Hard Drive Replacement: étape 2, image 1 de 1
    • Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.

    • The latch must be held in position to remove the battery.

  3. Gateway SA1 Hard Drive Replacement, Hard Drive: étape 3, image 1 de 1
    • Before you begin, it's recommended that you back up all your computer's information on the original hard drive. Also, verify the laptop is off and all cables are disconnected.

    • Turn the laptop over so the bottom is facing up.

  4. Gateway SA1 Hard Drive Replacement: étape 4, image 1 de 2 Gateway SA1 Hard Drive Replacement: étape 4, image 2 de 2
    • Loosen the three Philips cover screws that secure the hard drive.

    • These screws cannot be fully removed from the hard drive cover.

    • Use the spudger to lift and to remove the hard drive cover.

  5. Gateway SA1 Hard Drive Replacement: étape 5, image 1 de 2 Gateway SA1 Hard Drive Replacement: étape 5, image 2 de 2
    • Slide the original hard drive to the left and lift it to remove.

    • Insert the new hard drive.

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autres ont terminé cette réparation.

Diego Carteno

Membre depuis le 04/15/10

258 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 24-20, Regan Spring 2010 Membre de l'équipe Cal Poly, Team 24-20, Regan Spring 2010

CPSU-REGAN-S10S24G20

4 membres

14 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 11

30 derniers jours : 33

Total : 13,911