Introduction
The shell on the RC Mustang GT is mostly a cosmetic component, giving the car the unique appearance associated with GEAR'D UP's RC cars. The following steps will show how to replace the shell of the car.
Ce dont vous avez besoin
-
-
Flip the car over and remove the four 5mm Phillips #0 screws that hold the shell to the car chassis.
-
-
-
-
Flip the car over again to its upright position and vertically lift the shell from the car.
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.