Ghost Longboard Wheel Replacement

Introduction

Use this guide to replace the damaged, warped, or dented wheels on your Ghost Longboard. This guide requires minimal skill and no prior experience. It is especially useful if your board is not as fast as it used to be, it has become more difficult to turn, or it does not coast for as long as you would like it to. the ghost longboard wheels are easy to replace.

Ce dont vous avez besoin

Étape 1 Wheel

Ghost Longboard Wheel Replacement, Wheel: étape 1, image 1 de 1

Using a 15 mm socket wrench, unscrew the axle nut.

Modifier

Étape 2

Using your fingers, remove the axle nut from the axle.

Modifier

Étape 3

Remove the washer from the axle.

Modifier

Étape 4

Remove the wheel from the axle.

Modifier

Étape 5

Remove the second washer from the axle.

Modifier

Étape 6

Slide a new washer onto the axle.

Modifier

Étape 7

Place the new wheel on the axle.
Be sure to position the flat side of the wheel so it is facing inward.

Modifier

Étape 8

Place a second washer on the axle exterior to the wheel.

Modifier

Étape 9

Place an axle nut on the axle.

Modifier

Étape 10

Using a 15 mm socket wrench, tighten the axle nut.
Be sure to tighten the axle nut enough to prevent the wheel from wobbling, but not so tight as to prohibit the wheel from spinning freely.

Modifier