Réparez vos affaires Communauté Boutique

GoPro Hero 3 Silver Rear Housing Replacement

Ce dont vous avez besoin

  1. GoPro Hero 3 Silver Rear Housing Replacement, Battery: étape 1, image 1 de 2 GoPro Hero 3 Silver Rear Housing Replacement, Battery: étape 1, image 2 de 2

    • Pull back on the tab on the back of GoPro to open the battery cover.

    Modifier

  2. GoPro Hero 3 Silver Rear Housing Replacement: étape 2, image 1 de 1

    • Pull the battery out using the tab.

    Modifier

  3. GoPro Hero 3 Silver Rear Housing Replacement, Rear Housing: étape 3, image 1 de 2 GoPro Hero 3 Silver Rear Housing Replacement, Rear Housing: étape 3, image 2 de 2

    • Use the plastic opening tool to remove the faceplate.

    • There is some adhesive and clips so be careful and the faceplate should pop right off.

    Modifier

  5. GoPro Hero 3 Silver Rear Housing Replacement: étape 4, image 1 de 2 GoPro Hero 3 Silver Rear Housing Replacement: étape 4, image 2 de 2

    • Now that the faceplate is off, it is time to remove the 4 screws on each corner.

    • Use the T4 tool bit from the iFixit toolkit in order to remove the 4 screws on each corner.

    Modifier

  6. GoPro Hero 3 Silver Rear Housing Replacement: étape 5, image 1 de 2 GoPro Hero 3 Silver Rear Housing Replacement: étape 5, image 2 de 2

    • Note: Make sure you remove the door cover of the USB, mini HDMI, and SD port before. Separating the motherboard will be easier.

    • Using the plastic opening tool, slowly pry open the motherboard assembly.

    Modifier

  7. GoPro Hero 3 Silver Rear Housing Replacement: étape 6, image 1 de 2 GoPro Hero 3 Silver Rear Housing Replacement: étape 6, image 2 de 2

    • Use the spudger to gently pry off the connector of the housing to the motherboard.

    • You should now have the motherboard assembly and the housing separated.

    Modifier

  8. GoPro Hero 3 Silver Rear Housing Replacement: étape 7, image 1 de 1

    • In order to replace the buttons. The entire housing has to be replaced.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 5 autres contributeurs

Brian Alvarez

Membre depuis le 04/02/15

1 439 Réputation

6 tutoriels rédigés

Badges: 15

+ 12 badges supplémentaires

Équipe

Cal Poly, Team 24-7, Lancaster Spring 2015 Membre de l'équipe Cal Poly, Team 24-7, Lancaster Spring 2015

CPSU-LANCASTER-S15S24G7

3 membres

21 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 2,262